Kirjeldus
Overview
IS Shield with 2 channels mechanical relays and 2 channels MOS switch, providing an easy way for applications of voltage controlling from low to high.
The 3Pins breakout make it easy to build a project or prototyping quickly, by using many existing sensor modules (Electronic Brick). And there are some wireless interface breakout on board, you can use it to connect with many wireless module.
Features
- 2 mechanical relays with photo-coupled circuit
- 2 MOS switch with internal power supply
- Xbee, nRF24l02, RF315/433M module wireless interface
- Arduino AD pins 3 PINs interface breakout for Sensor module (Electronic Brick)
- Equipped with screw holes for easy installation
- Native Arduino/Iteaduino compatibility
Hardware
| Interface | Pin | Description |
| UART | 1 | Ground |
| 2 | 5V supply | |
| 3 | Tx | |
| 4 | Rx | |
| AD0/1/2 | 1 | AD0/1/2 |
| 2 | 5V supply | |
| 3 | Ground | |
| IIC | 1 | Ground |
| 2 | 5V supply | |
| 3 | Data wire of IIC | |
| 4 | Clock wire of IIC | |
| nRF24L01+Socket | 1 | GND |
| 2 | VCC33 | |
| 3 | CE(Chip Enable) | |
| 4 | SPI_CS | |
| 5 | SPI_SCK | |
| 6 | SPI_MOSI | |
| 7 | SPI_MISO | |
| 8 | nRF24L01+ IRQ Output | |
| XBee Socket | 1 | VCC33 |
| 2 | Dout | |
| 3 | Din | |
| 10 | GNF | |
| 4,5,6,7,8,9,11,12,13,14,15,16,17,18,19,20 | No Connect | |
| 315/433MHz RF module socket | 1 | GND |
| 2 | VCC | |
| 3 | D0 | |
| 4 | D1 | |
| 5 | D2 | |
| 6 | D3 | |
| 7 | VT |
Specification
| Version | 1.0 |
|---|---|
| Compatible Mainboard |
|
| Shield Functions | Control |
| Board Size | 60mm x 68mm |
| Operation Level | Digital 5V |
| Stackable | No |
| Model | IM120417022 |
| Accessories | N/A |
| Weight | 50.00g |
Arvustused
Tooteülevaateid veel ei ole.